Solar Equipment and Installations
Compact Solar System 4.2 - 12.6KWh
OUTPUT 240VAC
A new compact system of inverter, controller and equipment of lithium batteries with protections (totally wired and in a single module) with a modernist design that accompanied with photovoltaic panels conceives a KIT designed for the supply of electrical energy in isolated areas of network through photovoltaic energy.
This compact CSS (Controls System Solar) incorporates a 5000W inverter, a lithium battery 25.6V – 30A with BMS, plug output for power to different services, USB charging output (5V), protection fuses and power input. MC4 positive/negative connector for the panel.
Easy, fast and clean installation. Avoiding unattractive installations.
Domestic Solar Kit K-SAE
OUTPUT 10 - 30KWh
KIT designed for the supply of electrical energy in isolated areas of the grid by means of photovoltaic energy or against interruptions of the electrical supply.
The SAE kit consists of 270W photovoltaic panels and energy control, management and storage cabinets using lithium ferro phosphate batteries in a 4U rack format. Inverter is supplied for each power and voltage outputs to 220 / 230Vac or 380 / 400Vac (see table of characteristics in each power). It has built-in ventilation.
Modular systems of easy installation, destined from homes to fully autonomous power generation plants through solar energy.
Industrial Solar Kit K-SAE
OUTPUT 77 - 307KWh
KIT is designed for the supply of electrical energy in isolated areas of the grid by means of photovoltaic energy or against interruptions of the electrical supply.
The SAE kit consists of 330W photovoltaic panels and energy control, management and storage cabinets using lithium ferro phosphate batteries in a 4U rack format. Inverter is supplied for each power and voltage outputs to 220 / 230Vac or 380 / 400Vac (see table of characteristics in each power). It has built-in ventilation.
Modular systems of easy installation, destined from homes to fully autonomous power generation plants through solar energy.
Solar Power Plant K-SAE
OUTPUT 384 - 1.075KWh
KIT is designed for the supply of electrical energy through renewable sources with sufficient storage for autonomous operation.
The SAE kit consists of 330W photovoltaic panels and energy control, management and storage cabinets using lithium ferro phosphate batteries in a 4U rack format. Includes inverter for each power and voltage outputs at 220 / 230Vac or 380 / 400Vac (see table of characteristics for each power). It has built-in ventilation.
Modular systems of easy installation, destined from homes to fully autonomous power generation plants through solar energy.
Solar Power Plant K-SAE
OUTPUT 450 - 1.800KWh
40 foot container with lithium battery systems in rack with BMS and Kaco inverters from 50Kw up to 1 Mw.
KIT ON-GRID photovoltaic kits
K-OG
ON-GRID photovoltaic generation system with 330W photovoltaic panels for domestic use which results in energy savings in the electric bill. With FRONIUS PRIMO inverters from 3 to 8 KW for single-phase systems with dual MPPT, they can optionally be completed with a FRONIUS SMART METER that sends all the information to the monitoring system, so that it does NOT inject power into the power grid.
The FRONIUS SYMO from 3 to 20 KW and FRONIUS ECO of 25 kW in a three-phase system with a connection through WLAN or Ethernet make a flexible and powerful system.
In these Kit´s, the structure for fastening roof panels is optional, as is the monitoring of the FRONIUS SMART METER (bidirectional meter to record the energy consumption in your home). For more information consult with our engineering department.
Batteries & Invertors
TRACER-AN
80 - 100A
The TRACER-AN incorporates features of advanced MPPT technology, with efficiency not lower than 99.5% Ultrafast tracking speed and guaranteed tracking efficiency Advanced MPPT control algorithm to minimize the maximum rate of power loss and loss of time High quality components, perfecting system performance with maximum conversion efficiency of 98% Accurate recognition and tracking of the maximum power point of multiple peaks Load function and current limitation Compatible with lead and acid batteries and lithium-ion batteries Design of contact points dry for starting generators or AC power Battery temperature compensation function Real-time power statistics function Communication the port can provide the SVDC / 200mA power supply monitor and set the parameters through the phone application mobile or software for PC.
STI
200 - 1.000W
The inverter of the STI series is a pure sine wave power inverter that can convert 12/24 / 48VDC to 220 / 230VAC 50Hz based on a full digital and intelligent design.
It has high reliability and efficiency with functions of total protection, easy installation and operation.
The inverter can be applied in many fields, such as electrical appliances, power tools and industrial devices, etc., especially for photovoltaic solar energy systems, kits for domestic use.
HF48
5KW
The HF48 incorporates the advanced technology of integration of the battery charge controller and the inverter under the same control system. What improves the efficiency and performance of the system is to have immediate communication between all the devices that compose it.
The inverter has pure sinusoidal wave output. Dual voltage control and fully digitalized current. Advanced MPPT technology, with efficiency not lower than 99.5% and 4 charging modes (solar priority, network priority, solar only and only network).
V-POWER
10KW
Pure sine wave output.
Self-consumption and Feed-in to the grid.
Programmable supply priority for PV, Battery or Grid.
User-adjustable battery charging current suits different types of batteries.
Programmable multiple operation modes: Grid-tie, off-grid and grid-tie with backup.
Built-in timer for various modes of on/off operation.
Multiple communication for USB, RS-232, Modbus and SNMP.
Monitoring software for real-time status display and control.
Parallel operation up to 6 units for 10KW
TL3
50KW
The BLUEPLANET GRIDSAVE 50.0 TL3-S is a bidirectional inverter with a power of 50 kVA. Its solutions support energy suppliers, distribution network operators, EPCs and large companies in network management in order to maintain the balance between generation and consumption in the electricity grid. It is controlled by means of a main energy management system (EMS) through Sunspec Modbus TCP.
• Scalable • Systems with energetic high availability thanks to being able to connect several inverters to the same battery • High performance, especially in partial load • Suitable for reactive power • Easy to control thanks to an open communication standard
BAT-GEL
75 - 200Ah
Batteries of Gel BAT-GEL are used for solar applications, telecommunications, data centers, radio stations, solar streetlights and a long etc.
The uniform distribution of the electrolyte is achieved using silica (silicon dioxide) of high quality, to have a longer useful life.
The housing is ABS VO, flame retardant. Designed for a high life in cycles, with easy installation and without maintenance, with a 99% efficiency in the internal recombination of gases.
BAT-LI
12,8V – 12Ah
12,8V – 72Ah
25,6V – 30-36Ah
51,2V – 18Ah
Batteries of Gel BAT-GEL are used for solar applications, telecommunications, data centres, radio stations, solar streetlights and a long etc.
The uniform distribution of the electrolyte is achieved using silica (silicon dioxide) of high quality, to have a longer useful life.
The housing is ABS VO, flame retardant. Designed for a high life in cycles, with easy installation and without maintenance, with a 99% efficiency in the internal recombination of gases.
RACK-LI
51,2V • 50 - 100Ah
The RACK-LI is presented as a module in the rack format of lithium iron phosphate batteries of 100Ah and 48V, for energy storage in homes powered by solar or wind energy.
High performance and long service life (> 3,000 cycles – 80% DOD and> 10,000 cycles with 30% discharge). Based on the safest technology of lithium ferro phosphate (LiFePO4), prepared to withstand the worst conditions and maintain its capacity over the years.
These racks are equipped with BMS that includes communication RS485 and RS232 and protection against short circuits, overload, over-discharge and temperature.
SAE
51,2V • 2 – 72 KWh (low-voltage battery)
768V • 77 KWh – 1 MWh (high-voltage battery)
The Energy Storage System SAE consists of batteries (LiFePO4) in a 19 “rack-mounted and connected in a standard cabinet for use with the inverters that we detail in the K-sae photovoltaic kits.
Specially designed for OFF-GRID systems from domestic applications (low-voltage) to the highest demands of energy storage (high-voltage).
These racks are equipped with BMS and communication systems based on RS485, and RS232. They incorporate a LED RUN for alarm.
Waste to Energy
Plasma Gasification In Waste To Energy
Plasma gasification in waste to energy is one of the novel applications that were introduced many years ago. Landfill sites and incineration continue to be the primary methods used to dispose of wastes with significant negative impacts on the environment. Landfill releases methane which is 21 times more dangerous as a greenhouse gas than carbon dioxide. Incineration is often pushed as an alternative to landfilling. However, it is a known fact that incinerator ashes are contaminated with heavy metals, unburned chemicals and new chemicals formed during the burning process.
These ashes are then buried in a landfill or dumped in the environment. Rather than making waste disappear, incinerators create more toxic waste that poses a significant threat to public health and the environment. Sustainable and successful treatment of municipal solid waste (MSW) should be safe, effective, and environmentally friendly.
We build more than projects; we help progress society through economic development. Establishing a shared vision with customers and stakeholders, we deliver customized initiatives that help transition local content programs toward long-term economic development.
The mobile plasma gasification unit is designed as a single Monoblock unit with equipment for loading waste, a plasma reactor and a chamber for plasma cracking of synthesis gas, removal, cooling and purification of generated synthesis gas, to which industrial plasma system with arc agitators (oscillators), steam generators, steam superheaters, and plasma torches are connected.
The container has a fully welded metal framing design and is sheathed with mineral-cotton sandwich panels. This ensures the required durability and protection from external weather factors for the module which allows using the module outdoors without a special shelter. The container can be lifted and moved using a lifting gear by means of hooking the cross-beams. It is possible to create an automatically unloaded container.
The product is supplied in an assembled condition; external utilities are to be assembled according to the design documents. All components of the unit are fitted with instrumentation and automation means and a distributed and unified information display system.
Option for transporting the plasma gasification unit and/or option for a mobile plasma unit that is constantly transported and operated on a truck chassis:
1) Plasma unit on container trailers of a semitrailer tractor
2) Container of the plasma gasification unit with a hydraulic system for automatic loading/unloading from truck trailers
Estimation for a Minimum Capacity Plant (Single Module)
Item | Quantity/Container | Formula |
waste plasma gasification unit (4 tons per day) | 1 | 150 kg per hour |
Net Electricity Generation (kg per hour of municipal solid waste) | 1.5 kW per hour |
Estimation for a Maximum Capacity Unit (Single Module)
Item | Quantity/Container | Formula |
waste plasma gasification unit (25 tons per day) | 1 | 1000 kg per hour |
Net Electricity Generation (kg per hour of municipal solid waste) | 1.5 kW per hour |
Estimation for a Multi module Facility (52,500 tons per year (150 tons per day)) 3)
Item | Quantity/Container | Formula |
Waste plasma gasification unit (25 tons per day) | 6 pcs. | |
Electric and heat energy generating unit | 15-20 MW per hour |
Estimation for a Multi module Plant (87,500 tons per year (250 tons per day)):
Item | Quantity/Container | Formula |
Waste plasma gasification unit (25 tons per day) | 10 pcs. | |
Electric and heat energy generating unit | 20-30 MW per hour |
Estimation for a Multi module Plant (175,000 tons per year (500 tons per day))
Item | Quantity/Container | Formula |
Waste plasma gasification unit (25 tons per day) | 20 pcs. | |
Electric and heat energy generating unit | 40-60 MW per hour |
Or Call on
0808 302 4239
